QSC AD-S.SUB-WH ลำโพงซับวูฟเฟอร์ติดผนัง 6.5 นิ้ว 100 วัตต์

     The QSC AD-S.SUB is part of the AcousticDesign™ Series SUB/SAT loudspeaker solution, which is ideally suited for background music applications that require depth and clarity even at lower volume settings. The AcousticDesign Series SUB/SAT loudspeakers are specifically designed to be mix-and-match capable; meaning any combination of satellites may be paired with any subwoofer in the AD Series SUB/SAT line.

• Dual voice-coil for improved thermal dissipation and higher output
• Low saturation and low-loss 70/100 V transformers in mono mode
• Low-Z mono or stereo configurable
• 4x built-in high-pass filtered outputs
• Locking 4-pole Euroblock connectors
• Reversible rear panel cover with cable tie anchors
• Reversible V-wall mount hardware
• Intrinsic Correction™ voicings available via MP-M Series mixers and Q-SYS Platform, including the CXD-Q Series amplifiers
• Available in black (RAL 9011) or white (RAL 9010)

 

Specifications

LF transducer	6.5-inch (165 mm) dual voice coil weather treated paper cone woofer
HF transducer	N/A
Effective frequency range	45 Hz – 150 Hz
Rated noise power / voltage	100 W / 20 V (rms)
Sensitivity [dB] (rated @ 1 W, 1 m)	86
Coverage (‐6 dB) [°]	Omni
Directivity factor	TBD
Directivity index [dB]	TBD
Maximum SPL [dB] (continuous / peak)	100 / 106
Recommended amplifier	100 W
Transformer taps / impedance	70 V: 100, 50, 25, 12.5 W (mono only) 100 V: 100, 50, 25 W (mono only) Bypass: 4 Ω mono or 8 Ω + 8 Ω stereo
Connectors	Hi-Z mono input: 4-pole Euroblock with thru output Low-Z input: 4-pole Euroblock, left (mono) and right Hi-pass mono output: x2 4-Pole Euroblock for x4 satellites
Enclosure material	Vinyl wrapped medium density fiberboard
Port baffle / cover panel	ABS
Ingress protection	N/A
Operating environment	Designed for indoor use
Operating temperature range	-4 to 122° F (-20 to 50° C)
Net weight	23.6 lb (10.7 kg)
Product dimensions (Ø x H)	13.8 x 8.2 x 17-inch (350 x 209 x 432 mm)
Shipping weight	TBD
Shipping dimensions (H x W x D	TBD
Included accessories	V-wall bracket, 4x euroblock connector, rear cover panel, adhesive rubber feet
Safety agency	Transformer UL registered per UL1876, ROHS, CE compliant