เจ้าของร้านค้านี้ ไม่ได้เข้าสู่ระบบเป็นระยะเวลา 201 วัน แล้ว
ข้อมูล
น้ำหนัก
บาร์โค้ด
ลงสินค้า
อัพเดทล่าสุด
รายละเอียดสินค้า

BSS BLU-100  12x8 Signal Processor with Digital Audio Bus

     The BSS Audio Soundweb London BLU-100 12x8 Signal Processor with BLU Link is a DSP processor designed for use in networked audio routing applications. It offers a fixed configuration of 12 inputs and 8 outputs, configurable signal processing, and a high bandwidth, fault tolerant digital audio bus.

     The BLU-100 features open architecture with full configuration through HiQnet London Architect. A palette of processing and logic objects and "drag and drop" method of configuration provide a simple and familiar design environment. This processor features a low-latency, fault-tolerant digital audio bus of 48 channels, which uses standard Category 5e cabling, providing a distance of 100 yards between compatible devices. Fiber media converters can be used to increase the distance between devices to over 24 miles.

     The BLU-100 is compatible with the entire Soundweb London family, and its 48-channel digital audio bus represents channels 1-48 of the larger 256-channel digital audio bus when integrated with the BLU-800, BLU-320, BLU-160, BLU-120, and BLU-BOB devices. Analog Inputs provide software-configurable gain in 6 dB increments up to +48 dB per channel and software-selectable Phantom Power per channel. Phantom Power, Signal Present, and Clip information per channel is accessible without the requirement for a PC, from the clear front-panel LED indicators.

     A bidirectional locate function allows devices to be identified both from and within HiQnet London Architect. 12 Control Inputs and 6 Logic Outputs allow the BLU-100 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, a comprehensive documentation which details how Soundweb London systems can be integrated with third-party control systems, is included within the installation of HiQnet London Architect.

 

  • 12 analog inputs (with +48V phantom power per channel)
  • 8 analog outputs
  • Configurable signal processing
  • Rich palette of processing and logic objects
  • 48-channel, low-latency, fault-tolerant digital audio bus
  • Clear front-panel LED Indicators
  • Bidirectional locate functionality
  • 12 control inputs and 6 logic outputs for GPIO integration
  • Soundweb London interface kit for third-party control system integration (documentation)
  • HiQnet device
  • Configuration, control, and monitoring from HiQnet London Architect

 

Specs

Indicators
Input Signal Present, CLIP, 48 V (Input Only)
Other COM, STAT, ERR, PWR
Analog Input
Mic/Line Inputs 12 x Electronically Balanced on Phoenix Combicon Removable Screw Connectors
Nominal Gain 0 dB, Electronically Switchable up to +48 dB, in +6 dB Steps
Input Impedance 3.5 Kilohms
Maximum Input Level +20 dBu with 0 dB Input Gain, +8 dBu with 12 dB Gain
CMRR > 75 dB at 1 kHz
EIN < -128 dBu Typical with 150-Ohm Source
Phantom Power 48 V Nominal, Selectable per Input
Latency A/D Latency: 37/Fs [0.77 ms @ 48 kHz]
Analog Outputs
Outputs 8 x Electronically Balanced on Phoenix/Combicon Removable Screw Connectors
Maximum Output Level +19 dBu
Frequency Response 20 Hz to 20 kHz (+0.5 dB / -1 dB)
THD < 0.01% 20 Hz to 20 kHz, +10 dBu Output
Dynamic Range 108 dB Typical, 22 Hz to 22 kHz, Unweighted
Crosstalk < -75 dB
Output Impedance 40 Ohms Balanced, 20 Ohms Unbalanced
Latency D/A Latency: 29/Fs [0.60 ms @ 48 kHz]
Control Port
Control Ports 12 Inputs and 6 Outputs
Input Voltage 0 to 4.5 V
Input Impedance 2-Wire Mode: 4.7 Kilohms to +5 V
3-Wire Mode: >1 Megohm
Output Voltage Logic Output Voltage: 0 or +5 V Unloaded
Output Impedance Logic Output Impedance: 440 Ohms
Output Current Logic Output Current: 10 mA Source, 60 mA Sink
Watchdog Output
Output Current Opto Output Current: 14 mA Maximum
Voltage Withstanding Voltage: 80 V Maximum (Off)
Impedance Series Impedance: 220 Ohms (Isolated)
Control Network
Connectors RJ45 Ethernet Connector
Maximum Cable Length 300' / 100 m on Cat 5e Cable between Devices
Number of Maximum Nodes 60
Latency 11/Fs [0.23 ms @ 48 kHz]
Pass-Through Latency: 4/Fs [0.08 ms @ 48 kHz]
Power
Mains Voltage 100 to 240 VAC, 50/60 Hz
Power Consumption < 55 VA
BTU < 188 BTU/Hour
Operating Temperature Range 41 to 95°F / 5 to 35°C
Dimensions & Weight
Dimensions (HxWxD) 1.75 x 19 x 9" / 45 x 483 x 229 mm
Weight 6.4 lb / 2.9 kg
BSS BLU-100 12x8 Signal Processor with Digital Audio Bus
BSS BLU-100 12x8 Signal Processor with Digital Audio Bus
เงื่อนไขอื่นๆ
เช็ค Stock และราคาสินค้ากับเจ้าหน้าที่ก่อนสั่งซื้อทุกครั้ง
Tags

วิธีการชำระเงิน

ร้านค้านี้ยังไม่ได้กำหนดวิธีการชำระเงิน กรุณา ติดต่อกับทางร้าน เกี่ยวกับรายละเอียดในการชำระเงิน
ทางร้านยังไม่ได้ทำการเพิ่มบัญชีรับเงิน กรุณาติดต่อ เจ้าของร้าน
รายการสั่งซื้อของฉัน
เข้าสู่ระบบด้วย
เข้าสู่ระบบ
สมัครสมาชิก

ยังไม่มีบัญชีเทพ สร้างบัญชีใหม่ ไม่มีค่าใช้จ่าย
สมัครสมาชิก (ฟรี)
รายการสั่งซื้อของฉัน
ข้อมูลร้านค้านี้
ร้านImage V+
Image V+
Image Vplus บริการ ออกแบบ จำหน่าย ติดตั้ง งานระบบภาพเสียงแสง ระบบโสตทัศนูปกรณ์ แบบครบวงจร สำหรับงานห้องประชุม ห้องประชุมใหญ่ ห้องเรียน ห้องสัมมนา หรือห้องสตูดิโอ สำหรับการผลิตสื่อมัลติมีเดียต่าง ๆ ทั้งแบบออนไลน์และออฟไลน์ พร้อมให้คำปรึกษาเกี่ยวกับผลิตภัณฑ์ประเภท อุปกรณ์ถ่ายภาพ , เครื่องควบคุม , เครื่องเสียง , จอแสดงภาพ ฯลฯ รวมไปถึงชุดอุปกรณ์เสริมต่างๆ อีกมากมาย ตลอดจนการบริการหลังการขาย ทางเราได้รวบรวมแบรนด์เทคโนโลยี ให้รองรับและตอบสนองการใช้งานและความพึงพอใจด้วยคุณภาพระดับมาตราฐาน
เบอร์โทร : 095 924 5474
อีเมล : image.vplus@gmail.com
ส่งข้อความติดต่อร้าน
เกี่ยวกับร้านค้านี้
สินค้าที่ดูล่าสุด
ดูสินค้าทั้งหมดในร้าน
สินค้าที่ดูล่าสุด
บันทึกเป็นร้านโปรด
Join เป็นสมาชิกร้าน
แชร์หน้านี้
แชร์หน้านี้

TOP เลื่อนขึ้นบนสุด
พูดคุย-สอบถาม